Garage Flooring LLC of ColoradoReviews 3,112

Because the densifier had to be resent, I have not been able to actually apply the product. The delay means I will not apply it until the beginning of July. I understand that the original densifier shipment was damaged thus causing the delay. Just letting you know that I am not yet able to evaluate the product. Once I use it I will be happy to provide more input.

Also, Kristi Haydon was very helpful in attending to getting the item resent; and, in following up with me. Her professional attitude and service was greatly appreciated.

G-Flooring arrived on time and, and even though I recruited a neighbor to help, the delivery driver removed the rolls from truck and placed them where I wanted them. Great service. My two 24'x10' rolls arrived with temps in the 80s so I was able to unroll and install the flooring right away. I followed installation guidelines from the enclosed literature and also as shown online. I ordered the slate grey large coin and it laid down easily, cut very easily with a utility knife and fully relaxed flat within 2 days. I used the optional center joining strip as well as the door thresh hold strip which I highly recommend for a finished look. The finish is between satin and gloss, is not slippery to walk and work on, allows easy rolling for my creeper and tool carts and the color works perfectly to locate dropped bolts/nuts, etc. It's been installed now for just under a month and I couldn't be more pleased. Take advantage of the free samples to ensure you like the colors/patterns.

Thanks to All Garage Floors I was able to get the surface treatment that I wanted. I have about 1,000 sq ft, so I ordered 6 gallons. I used a cheap pump sprayer. Each coat used 3 gallons. It's obvious that the second coat had more gloss, but I wish I'd have done a third for a more uniform gloss. Typical of a mass produced slab there were dips and small valleys. Usually I saw them after the application so I didn't walk on the wet surface to sop up the excess and fingers crossed that the areas hold up, they are shinny:-).

I plan on installing a locking, plastic tile floor and didn't want oil to pass through and soak in, I'd say that this coating will DO THE JOB!